by296p thru by299p vishay general semiconductor document number: 88948 revision: 08-apr-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 1 soft recovery plastic rectifier features ? fast switching for high efficiency ? low forward voltage drop ? low leakage current ? high forward surge capability ? solder dip 260 c, 40 s ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec typical applications for use in fast switching re ctification of power supply, inverters, converters and freewheeling diodes for consumer and telecommunication. (note: these devices are not q101 qualified.) mechanical data case: do-201ad, molded epoxy body epoxy meets ul 94v-0 flammability rating terminals: matte tin plated leads, solderable per j-std-002 and jesd22-b102 e3 suffix for consumer grade, meets jesd 201 class 1a whisker test polarity: color band denotes cathode end primary characteristics i f(av) 2.0 a v rrm 100 v to 800 v i fsm 70 a t rr 500 ns i r 10 a v f 1.3 v t j max. 125 c do-201ad maximum ratings (t a = 25 c unless otherwise noted) parameter symbol by296p by297p by298p by299p unit maximum repetitive peak reverse voltage v rrm 100 200 600 800 v maximum rms voltage v rms 70 140 420 560 v maximum dc blocking voltage v dc 100 200 600 800 v maximum average forward rectified current 0.375" (9.5 mm) lead length at t a = 55 c i f(av) 2.0 a peak forward surge current 8.3 ms single half sine-wave superimposed on rated load i fsm 70 a operating junction temperature range t j - 50 to + 125 c storage temperature range t stg - 50 to + 150 c
by296p thru by299p vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 88948 revision: 08-apr-08 2 note: (1) thermal resistance from junction to ambient at 0. 375" (9.5 mm) lead length with both leads equally heat sink ratings and characteristics curves (t a = 25 c unless otherwise noted) electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol by296p by297p by298p by299p unit maximum instantaneous forward voltage 3.0 a v f 1.3 v maximum dc reverse current at rated dc blocking voltage t a = 25 c t a = 100 c i r 10 500 a maximum reverse recovery time i f = 10 ma, i r = 10 ma, i rr = 1.0 ma t rr 500 ns maximum forward recovery time i f = 100 ma t rr 1.0 s typical junction capacitance 4.0 v, 1 mhz c j 28 pf thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol by296p by297p by298p by299p unit typical thermal resistance (1) r ja 15 c/w ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode by298p-e3/54 1.1 54 1400 13" diameter paper tape and reel by298p-e3/73 1.1 73 1000 ammo pack packaging figure 1. forward current derating curve 0 25 50 75 100 125 150 175 2.0 1.5 1.0 0.5 0 a v erage for w ard c u rrent (a) resisti v e or ind u cti v e load 0.375" (9.5 mm) lead length am b ient temperat u re (c) figure 2. maximum non-repetitive peak forward surge current 1 10 100 8 0 60 40 20 0 nu m b er of cycles at 60 hz peak for w ard s u rge c u rrent (a) t j = t j max. 8 .3 ms single half sine- w a v e
by296p thru by299p vishay general semiconductor document number: 88948 revision: 08-apr-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 3 package outline dimensions in inches (millimeters) figure 3. typical instantaneous forward characteristics figure 4. typical reve rse characteristics t j = 100 c t j = 125 c t j = 25 c t j = 50 c 100 10 1 0.1 0.01 0.3 0.5 0.7 0.9 1.1 1.3 1.5 instantaneo u s for w ard v oltage ( v ) instantaneo u s for w ard c u rrent (a) t j = 100 c t j = 125 c t j = 25 c t j = 50 c 1000 100 10 1 0.1 0204060 8 0 100 percent of rated peak re v erse v oltage (%) instantaneo u s re v erse c u rrent ( a) figure 5. typical junction capacitance 100 10 1 10 100 re v erse v oltage ( v ) j u nction capacitance (pf) t j = 25 c f = 1.0 mhz v sig = 50 m v p-p do-201ad 0.210 (5.3) 0.190 (4. 8 ) dia. 0.052 (1.32) 0.04 8 (1.22) dia. 1.0 (25.4) mi n . 1.0 (25.4) mi n . 0.375 (9.5) 0.2 8 5 (7.2)
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
